The T1 is a second generation version in-vehicle tracking system. Its unique performance, size and cutting edge power management makes this system truly one of a kind.

As the level of our customer base demands, our hardware reliability is second to none in the world as would be necessary for the use by Military and Police. The T1 is a well proven GSM/GPS tracking system that has been in operation for several years. Due to its intelligent firmware which is constantly monitoring its own status the T1 is probably one of the most reliable GSM tracking systems available.

It’s easy to install and use for the most simple tracking tasks yet it can also be used as part of a complex full feature covert surveillance installation. The unit is highly versatile. It can be installed in vehicles, machinery, containers or buildings and will provide position and activation information instantly.

Key Features

  • Vehicle Hardwired;
  • Worldwide GSM tracking;
  • Cell ID notification;
  • Signal & Position Quality information;
  • SMS, GPRS & GSM Data connection;
  • Small size 80 x 100 x 30 mm;
  • Optional internal battery;
  • 48 GeoFence areas;
  • Dynamic GeoFence;
  • 32,512 logged positions;
  • 4 inputs & 2 outputs – inputs can directly trigger an output;
  • In-built Motion Sensor;
  • Boot loader for maintenance updates.

The T1 will work with any GSM network. Our devices are all developed with self-checking status technology and will always provide the best available connection to the network. Our hardware continually updates its status with the network, ensuring the maximum availability when it is needed.

Data logging

The T1 has a powerful 8 Mb Flash memory onboard. This allows the system to store information about position, time, heading, speed, etc. The T1 has a 32,512 positions log and can be set to send a warning when the log is full. The log can be downloaded via GSM to the CP2 tracking software or directly via a local cable.

Tracking

Besides live tracking from the CP2 software via SMS, GPRS or GSM Data the T1 itself can be configured via various timers and triggers to report back to the software when specific events happen. Live tracking of the unit has no influence on the memory data logging. The system will also show GSM Cell ID, GSM signal strength and number of satellites in use when ever it’s reporting to the CP2 software, essential for confidence in the unit.

GSM

Using a Quad-band GSM modem the system can be deployed in any GSM network around the globe. The system will always report the GSM Cell ID: ideal in situations where GPS may be lost.

GeoFence

The T1 supports 48 configurable GeoFence areas. The system can be configured to trigger alarm messages and log data when leaving or/and entering defined areas. The GeoFence areas can be configured as an input event, so alarms only will be triggered when activated inside or outside an area.

Dynamic GeoFence

The T1 can be set to automatically GeoFence itself. The system will activate a GeoFence zone around a fixed area whenever the ignition input is switched off.

Input Capability

The T1 supports a variety of inputs, including:

  • Door opening / closing;
  • Boot opening / closing;
  • Covert panic alarm activation.

All input events can be configured to report their status into the CP2 software.

Output Capability

If installed into a vehicle, events that could be activated include:

  • Audio alarm;
  • Lights on/off;
  • Ignition based immobilisation.